The EL-TRANS S.A. company offers transport services all over Europe, including domestic haulage and haulage to eastern European countries (Russia, Ukraine, and Belarus). We specialize in transporting liquid substances of the following kind:
• hazardous materials assigned to class 3, 4.1, 5.1, 6.1, 8 and 9 according to the ADR convention
• materials that must be stored at a specified temperature
• neutral materials.
All haulages accomplished by ELTRANS are insured.

Modern fleet of environmentally friendly vehicles currently comprises nearly 80 trucks of the following brands:
• Volvo FH12 (Euro 3 and Euro 5 environmental classes)
• Scania (Euro 5 environmental class).

All trucks are maintained in excellent technical conditions and have been operated not more than for 5 years. Older trucks are replaced by new ones.

Moreover, we have at our disposal over 80 semitrailer tanks manufactured by the Magyar and LAG renowned manufacturers. Average age of the tanks is 4 years.

Our entire fleet of trucks is equipped with the Autoguard GPS position-finding system. This equipment allows to immediately track down any of the currently transported cargo. All our trucks are also equipped with the EFC fuel control system that allows to optimize truck tanking operations both in terms of truck operational costs and environment protection. In addition, all our trucks are equipped with automatic system of highway toll payment.

Blackmer E106 rotary compressors
may be used to pneumatically assist unloading of liquid cargos. Compressor body and rotor are protected against aggressive chemicals by chromium-nickel coatings, turbine blades are made of a graphite composite material. The sucked-in air is filtered by a two-stage filter. A check valve and a relief valve protect the system against air pressures exceeding a preset upper threshold. Compressor is driven from a power take-off installed at the truck gearbox via a Cardan shaft.

Blackmer STX 3 rotary pumps

may be used to load/unload liquid cargos. Pump body, rotor and other elements that may be in contact with the pumped media are made of the 316L stainless steel. Pump blades are made of special plastic resistant to media (Duravane). 3″ suck-in port and 3″ pump-out port are positioned horizontally to facilitate hooking up loading/unloading hoses. The ports are equipped with the MK80+VB80 joints. The pump is hydraulically driven from the truck hydraulic system via a hydraulic drive.

Blackmer CCL501 high efficiency, reliable, bi-directional rotary pumps

may be used to load/unload liquid cargos. They may pump media both directions. Pump body, rotor and other elements that may be in contact with the pumped media are made of the 316L stainless steel. The Bi-lobe rotor and its seals are resistant to temperature 110°C. 3″ suck-in port and 3″ pump-out port are positioned horizontally to facilitate hooking up loading/unloading hoses. Both ports may be interchanged by means of rotating the rotor cover. The pump is hydraulically driven from the truck hydraulic system via a hydraulic drive.

 

Capacities of our semitrailer tanks range from 22,000 to 53,000 liters. Variety of makes include 3-compartment tanks, single compartment tanks, thermally insulated tanks, heated tanks (to control cargo temperature), and tanks internally lined with layers of a rubber resistant to chemically aggressive substances.

Independent self-contained tank loading/ unloading systems manufactured by Blackmer are composed of the E106 compressors and the STX3 and CCL501 pumps. Technical specifications of all available models of the additional equipment may be found on the linked Web pages.

Contact with us

TRANSPORT I SPEDYCJA

Copyright © 2022 EL-TRANS.  All Rights Reserved.